Global Electrical & Automation ( Naarvi Group Company )

Minimum order quantity: 01 Piece

NG GLOBAL Gas detectors can be used to detect combustible, flammable and toxic gases, and oxygen depletion. This type of device is used widely in industry and can be found in locations, such as on oil rigs, to monitor manufacturing processes and emerging technologies such as photovoltaic. They may be used in firefighting

Minimum order quantity: 1 Set

We are a well-known organization, which is engaged in providing LPG/CNG Manifold System  to the clients. The services offered by us are extensively availed for commercial and industrial usage of LPG. Moreover, the systems installed by us ensure easy functionality same as cylinders. These services are offered to the clients as per their specifications

Minimum order quantity: 01 Piece

S600-ExIR2-UV point type infrared / UV flame detector contains two infrared wavelength sensors and a highly sensitive imported UV/ultraviolet sensor and optical filter. The ultraviolet sensor can respond to ultraviolet radiation at the moment of fire and explosive ignition. The other two infrared sensors, one has the highest sensitivity to the CO2 emission spectrum (4.4μm), and the other interferes with ambient light and heat radiation For detection, the detector makes a composite judgment on the ultraviolet and infrared signals generated in the event of a fire, and performs multi-signal processing in conjunction with the logical comprehensive judgment of the flame flicker frequency to minimize false alarms and the best fire detection performance required. The flame detector has an early warning function for the fire of organic materials such as hydrocarbons and the fire of inorganic materials. Technical Parameters ◆ Response spectrum range: 4.4μm, 3.8μm, 185-260μm ◆ Response time: <5s ◆ Viewing angle range: ≤110 ° ◆ Detection distance: Class I ◆ Ambient temperature: -10 ~ 55 ℃ ◆ Environmental humidity: ≤95% RH ◆ Pressure range: 86 ~ 106Kpa ◆ Working voltage: DC24V ◆ Working current: current≤25mA, alarm current≤35mA ◆ Executive standard: GB15631-2008, GB12791-2006 ◆ Explosion-proof grade: EXdⅡCT

Minimum order quantity: 1 Piece

Advance interlock to protect from lekage into environment after successfully fill/empty  O2 gas  Tank.

Also protect from above the desired pressure range 

Minimum order quantity: 01 Piece

A smoke detector is a device that senses smoke, typically as an indicator of fire. Smoke detectors are usually housed in plastic enclosures, typically shaped like a disk about 150 millimetres (6 in) in diameter and 25 millimetres (1 in) thick, but shape and size vary. Smoke can be detected either optically (photoelectric) or by physical process (ionization). Detectors may use one or both sensing methods. Sensitive alarms can be used to detect and deter smoking in banned areas. Smoke detectors in large commercial and industrial buildings are usually connected to a central fire alarm system.

Minimum order quantity: 10 Piece

Our valuable clients can avail from us a quality assured array of Heat Detector within the committed period of time. The products we are offering are manufactured using high quality components under the direction of highly skilled and experienced professionals. Moreover, one can get these products at reasonable rates from us. Moreover, we assure safe delivery of these products at clients end.

Make: Palladium AGNI Safety Devices

Features:

• Designed to provide open area protection
• Can be used with any conventional fire alarm control panel
• Two LEDs on each detector provide local 360° visible alarm indication.
• Flash every 3~5 seconds indicating that power is applied and the detector are working properly.
• LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit.
• The alarm can be reset only by a momentary power interruption.

• Height: 2.2 (55 mm) installed in Base
• Diameter: 4.0 (103 mm)
• Weight: 5.5 oz. (155 g)
• Installation Temperatures: 14°F to 122°F (-10°C to50°C)
• Operating Humidity Range: 10% to 93% Relative Humidity Non-condensing
• Operating Voltage Range: 9 to 28VDC Volts Non-polarized
• Standby Current: 40µA @ 24 VDC
• Maximum Alarm Current (LED on): ≤30mA @ 24 VDC
• Fixed Temperature Rating: 135°F (57°C)

Minimum order quantity: 5 Piece

With the advent of advanced tools and technologies, we are offering an exceptional array of Smoke Detector Alarm that is easy to use. Our entire product range of this product is delivered in various types at clients end. These products are used in various industries for fire protection. Smoke Detector, Fire Response Indicator, Heat Detector, Fire Alarm Panel, Gas Leakage Detector, Fire Hooter, Manual Call Point, Fire Alarm Control Panel, Gas Release Panel, Addressable Fire Alarm System, Fire Fighting Equipments, Fire Fighting Accessories, Fire Extinguisher, Hydraulic Pump

Get best price for Addressable  Smoke Detector